It is appriciated if customer can provide the CDR or AI file. If not , we designer can make it according to customer’s request for free.
2 make the mould
The mould is made by the artwork that is confirmed by customer. A mould is made from copper usually. It is a necessary step to start production.
3 Color and rubber mixing
This is the step to prepare the raw material of the bracelet. We have to make the color as the pantone color customer wants.
Commonly 5.5g per bracelet.
5 start production
Set the mould on the machininspirational quotes on rubber braceletse and warm up to needed tempreture. 15k pcs bracelets can be done in 1 day by 1 machine.
6 edge cutting
Use the machine to cut the extra part of the bracelet and divice the bands made by one mould.
7 quality inspection
The defective must be picked out before packing.
8 packing and dilivery
The bulk packing is 100pcs/ bag, 2500pcs/ctn. There can be individually wrapped if customer request. We have the confirm the dilivery details before dispatching.
harley-davidson-silicone-wristbanddesign-silicone-wristbands-online There are 8 steps to make a rubber bracelet.
Design the artwork. An artwork includes the information of order number, size, logo style, order quantity and other options like glowing and individual pack. The most importantly it shows what the bracelet looks like with your message or logo. It is direct way to check if wording, colors of bracelet and logo are correct.
Make the mould or film. A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. A mould is made from copper.
A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of bracelet as logo and wording.
Prepare the rubber material. A rubber bracelet is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored.
We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Normal size of 202*12mm bracelet is weighted about 6g.
Produce bracelets by the mould. As we mentioned before in 2nd and 3rd step, we will transfer the blocks to bracelets by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a bracelet, smooth and strengthened.
Edge cutting. A semi-product of rubber bracelet has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good.
Color the logo and wording. The bracelet comes out from moulding machine without colors on the logo and lettering. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing.
Clean the product. As the bracelet has static electricity, dust will be on the surface and hard to move off. So we need to clean the bracelet before packing. We usually wash it with water once.
After washing, we will check the quality.
Packing and delivery.We count the quantinspirational quotes on rubber braceletsity by weighting. Normally packing will be 100pcs/bag, and 2500pcs/ctn. Individual packing is available.