flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets thcamo silicone wristbandse specifications. If it does not meet the specifications, it will be discarded.
Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspectcamo silicone wristbandsion, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.
We are professional rubber bracelet maker with years of experience.
Rubber bracelet is not only used as promotional gift, but also as a medical alert tool. Medical alert bracelets is commonly used. It is a high quality rubber bracelets with the ID printed on. We can print bar code, QR code or unique serial number together with some detail of the medical institute. Usually the wristband width need at least 15mm so that the code is clear enough to be scaned. We you scan the code with a phone, the detail of patient name, disease, taboo drugs, status will show up. It is a good help for doctor and patient to know the treatment. All the medical bracelets should made from 100% silicone which is harmless and eco friendly to avoid secondary injury to patients.
If the bracelet is embeded with a chip, it will note down the information of exercise, heart beat and sleeping. Then trafer it to the phone app. It contribute to health care.